This multiple wave form signal generator is ideal for your electronics lab. It produces precision sine, square, or triangle wave forms. Use the unit in a variety of lab applications, including audio experiments, AC circuit studies, wave form experiments, and electronic circuitry testing. For 110 VAC, 60Hz.

• 2 distinct and separate outputs: 1 variable and 1 fixed at TTL levels (capable of driving 10 standard TTL loads)
• Variable output with short-circuit protection
• Signals at the variable output are symmetrical around ground with the variable DC offset control off
• DC coupled output
• 600-ohm output impedance
• VCO and sweep capabilities
• 0.2Hz - 200kHz frequency range

Includes instruction manual. Size: 7.5cm x 24.5cm x 18.5cm.

Specifications:
Variable (function) Output

Impedance:	• Constant 600O ±5%, short circuit proof
Amplitude:	• 4 Selectable ranges: 1mV-10mVp-p; 10mV-100mV; 100mV-1Vp-p; 1V-10Vpp (open circuit)
DC offset:	• Zero when feature is not selected, variable -5VDC to +5 VDC into open circuit when selected. The total AC (signal) plus DC (offset) output is limited to ±10Vp-p into open circuit and ±5Vp-p into 600O
TTL output:	• Standard TTL-level square wave (in all models), buffered to drive 10 TTL loads. The rise/fall time is less than 25ns, and synchronous with variable outputs
Sweep Input:	• DC coupled, BNC connector
	• Impedance: 30kO
Sensitivity:	• 0 to ±10V input sums with voltage at frequency vernier to sweep output frequency up to 100:1; linear sweep range in 10:1, maximum in ±12V
Modes:	• Frequency range in all modes is 0.2Hz to 200kHz, set with a continuously variable 10:1 frequency vernier and marked in 45 steps and 6 decade ranges. The dial is calibratedto ±5% of setting at 10Hz, 100Hz, 1kHz, and 10kHz.
Square:	• ±1% typical time symmmetry square wave (calibrated to £1.5%) with rise/fall time less than 100ns (into 600O+20pF)
Sine:	• £1% THD typical; calibrated to <2% up to 100kHz.
Triangle:	• Better than 1% linearity

Email this Product to a Colleague