Deluxe Learn to Solder Kit, contains: SL-75 Variable temperature station with conical tip, SL-75T2 Wedge tip, SP-1A Solder practice kit, ST-1 Side cutters, SE-1 Solder ease kit, Dimensions: 18 x 16 x 10in, Temperature range: 350 deg to 900 deg F
Dry Field Mapping Kit, includes cork-covered base, 30cmx26cm; pad of 25 sheets pre-printed conductive paper 28cmx21.5cm; pad of 100 sheets preprinted paper for drawing fields; ten metal-headed push pins; a silver conductive pen
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D100
Demonstration Dynamo, Hank Crank, Electrical Output Via 4mm Terminals, Hand Powered, May Also Be A Motor Powered By 6 To 8V Power Supply, Model Is Mounted On A Base Plate 200 X 125 mm Approx. Which Also Carries A Hand-Drive Pulley 125 mm Diameter Coupled
Determining the density and mobility of charge carriers in n-Germanium, Optional additional setup available for determining the density and mobility of charge carriers in p-Germanium by ordering 586852 p-Ge on plug-in board.
Rheostats - Standard, Resistance 2.5 Ohms, Max. Current 9 Amp, Heavily Oxidized Constantan (Copper-Nickel Alloy) Wire On A Vitreous Enameled Steel Tube, 2;4 mm Terminal Posts Which Are Fitted To Facilitate External Connection Conventional 4 mm Plug, Phosphor Bronze
Rheostats - Standard, Resistance 16 Ohms, Max. Current 4 Amp, Heavily Oxidized Constantan (Copper-Nickel Alloy) Wire On A Vitreous Enameled Steel Tube, 2;4 mm Terminal Posts Which Are Fitted To Facilitate External Connection Conventional 4 mm Plug, Phosphor Bronze
Analogue To Digital Convertor, Excellent System For Demonstrating The Basis Of Digital Communications. An Analogue Input In The Range 0 To 7V Is Converted To A Binary Digital Output In 1V Steps (I.E. 1V Is Represented By 001, 2V By 010, Etc.)
Set Of Components For Electronics Experiments, Assortment Of Components For Basic Experiments In The Area Of Electronics Using A Component Plug-In Board. In A Storage Case With Matching Foam Inlay.
Solar Cell with wires, 6V, 70mA, Monocrystalline, High Efficiency Miniature, Efficiency: 17.0%, Dimensions: 95mm x 51mm x 3mm, For larger load applications including higher voltage and current loads, compact size with solid attractive casing
Variable Battery Power Supply, Holds Up To (4) D Cells - 1.5, 3, 4.5, Or 6 Volts Dc Power With 4Mm Sockets - Can Be Series Or Parallel, Perfect For Electronics, Physics, Or Even Biology Experiments
Demonstration Compass, 10Cm Long Magnetic Needle On Compass Map, Easy To Demonstrate The Cardinal Points Of A Compass And Determine All Their Directions.
Rheostats - Standard, Resistance 1600 Ohms, Max. Current 0.3 Amp, Heavily Oxidized Constantan (Copper-Nickel Alloy) Wire On A Vitreous Enameled Steel Tube, 2;4 mm Terminal Posts Which Are Fitted To Facilitate External Connection Conventional 4 mm Plug, Phosphor Bronze
Adapter, myDAQ, allows to connect sensors to National Instruments interface, Includes: two connectors for analog sensors and one connector for digital sensors, screw terminal and header pins provide access to myDAQ lines not used by connectors
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School