Go Direct* Photogate, double-gate sensor that includes two photogates built into the arms of the sensor, which accurately measures velocity and acceleration, Infrared source: Peak at 880 nm, Gate width: 77.5 mm, Battery: 300 mAh Li-Poly Rechargeable
Go Direct* Sensor Clamp, securely fastens to a wand-style Go Direct sensor, and the included lanyard works as a strap to prevent accidental drops during investigations in the field
Go Direct* Nitrate Ion-Selective Electrode, Range: 1 to 14,000 mg/L, 2-11 PH, 1 to 4 M omega Electrode resistance, 300 mA Li-Poly Battery, 500 full charge cycles (several years depending on usage)Battery life, connects via Bluetooth* wireless technology
Go Direct pH Electrode, Type: Sealed, gel-filled epoxy body, Ag/AgCl, 12 mm outer diameter, Range: pH 0-14, Isopotential pH: pH 7, Temperature Range: 5 to 80°C, Response Time: 90% of final reading in 1 second
Energy Sensor, offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels, measures the current and voltage of the system. Data-collection and analysis software
Electrode Carbon with Stopper, Material: Carbon and rubber, Carbon rod, Fitted into rubber stopper, For use with Hoffman Electrolysis, Diameter: 0.25 in
Go Direct* Sensor Cart, Green, for College, High School, and Middle School Science, features built-in, wireless sensors for one-dimensional dynamics and kinematics experiments, directly connects wirelessly via Bluetooth, Position resolution: 0.25 mm
Go Direct* Calcium Ion-Selective Electrode, used to measure the concentration of calcium (Ca2+) in aqueous samples, connects via Bluetooth* wireless technology or wired via USB to your device, For Go Wireless* Electrode Amplifier, Go Wireless* PH
0.01pH accuracy, IP54 Grade with 30 sets data memory,Electrode condition icon to show pH electrode performance,ATC/MTC, 3 point calibration, auto buffer recognition,Auto/manual endpoint, recall last calibration data
Dynamics Cart and Track System with Go Direct* Sensor Cart and Long Track, for College and High School, completely wireless system simplifies experiment setup & allows basic experiments to be conducted with/without the track, Position resolution: 0.25mm
Go Direct* Sensor Cart, Yellow, for College, High School, and Middle School Science, features built-in, wireless sensors for one-dimensional dynamics and kinematics experiments, directly connects wirelessly via Bluetooth, Position resolution: 0.25 mm
Galvanic principle, IP54 Grade with 30 sets data memory, Galvanic DO electrode, no warm up needed, save time,Auto/manual endpoint, recall last calibration data,Easy to calibrate
Go Direct* Sound Sensor is used to easily capture and evaluate waveforms, connects via Bluetooth* wireless technology or wired via USB, for College, High School, and K–8, Rechargeable Battery, Response: A- or C-weighted, Range: 55–110 dB, Resolution: 0.1 dB
Electrolysis Electrode, Material: Platinum, Sealed in glass tubes inserted securely in a rubber stopper, Fit standard electrolysis tubes, It has a rubber stopper No.1 with 18 gauge copper wire, Diameter: 0.75 cm, Length: 8.89 cm
0.5%FS, IP54 Grade with 30 sets data memory ,3 predefined standards, ATC/MTC,Auto/manual endpoint, recall last calibration data,4 pole cond. Electrode to measure large range, ATC
Go Direct* Chloride Ion-Selective Electrode User Manual, contains: bottle of High Standard solution with SDS (1000 mg), bottle of Low Standard solution with SDS (10 mg/L Cl-), Short-Term ISE Soaking Bottle, Polishing strip, Micro USB Cable
Ethanol sensor, used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample
High Current Sensor, Use in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects, range of +/-10 A, Current is measured with a Hall Effect sensor, which uses the magnetic f
Go Direct* Ammonium Ion-Selective Electrode, Range: 1 to 18,000 mg/L, 2-7 PH, 0.1 to 5 M omega Electrode resistance, 300 mA Li-Poly Battery, 500full charge cycles (several years depending on usage)Battery life, connects via Bluetooth* wireless technology
Dynamics Cart and Track System with Go Direct* Sensor Cart, for College and High School, completely wireless system simplifies experiment setup & allows basic experiments to be conducted with/without the track, Position resolution: 0.25mm, Track length: 1.2 m
Go* motion detector that connects directly to a computers USB port-eliminating the need for an additional data-collection interface, teacher package, used to collect position, velocity and acceleration data of moving objects
0.01pH accuracy, IP54 Grade with 30 sets data memory,Electrode condition icon to show pH electrode performance,ATC/MTC, 3 point calibration, auto buffer recognition,Auto/manual endpoint, recall last calibration data.
Go Direct* Tris-Compatible Flat pH User Manual, used for any lab or demonstration that can be done with a traditional pH meter, including acid-base titrations, monitoring pH in an aquarium, and investigating the water quality of streams and lakes
List View
Easy View (new)
