Vernier® Potassium Ion-Selective Electrode

Ratings: (No Reviews)

Total Ratings: 0
Avg. Ratings: 0.0 out of 5

K-BTA
470112-984EA 298.99 USD
470112-984
Vernier® Potassium Ion-Selective Electrode
Electrodes ISE Electrodes
Measure the concentration of potassium ions in aqueous solutions.

  • Stick-style sensor
The Potassium Ion-Selective Electrode makes the measure of potassium ions portable. When used with a Vernier LabQuest 2, the Potassium ISE can be used to take readings in the field – at lakes or streams. This sensor is easier to set up and use than other methods of measuring potassium ion concentration in aqueous solutions. Because it is a stick-style sensor, its use is similar to using a conductivity probe or a pH sensor in a laboratory setting or in the field.

Ion-Selective Electrodes require good chemical technique and careful calibration to obtain accurate results. They are not recommended for middle school or elementary students.

We recommend that you do not purchase Potassium Ion-Selective Electrode replacement modules too far in advance of their expected time of use; degradation occurs while replacement modules are stored on the shelf.

Interfering Ions: Rb2+, Cs2+, NH4+, Ca2+, Mg2+, Li+
Electrode Resistance: >50 mΩ
Electrode Slope: 56 +/- 4 mV/decade at 25°C
Calibration Voltage (typical): 2.7 V (1000 ppm), 1.9 V (10 ppm)
Reproducibility (precision): +/- 11% of full scale
Minimum sample size: 3 mL in a 50 mL beaker



   
 

ORDER

SPECIFICATIONS

WRITE A REVIEW

REVIEWS (0)