CENCO® Electronic Systems 1 and 2

Storage and Content all in one!

The CENCO® Electronics System 1 Kit comes in a heavy duty carry-case for ease of storage. Simple to set-up with all components easily accessible. A full manual with detailed activities for both the teacher and the student is included along with scientific background on each topic.

Experiment topics include: Forward bias diode, half wave rectifier, zener diode, switch transistor, measuring gain with a PNP power transistor, infrared diode and phototransistor, light dependent resistor and application, temperature dependent resistors, silicon controlled rectifier, triac, injunction transistor.

Included in the CENCO® Electronics System 1 Kit:

Board for Electricity and Electronics
Si Diode
Zener Diode
Red LED Diode
Green LED Diode
Infrared (IR) Diode
Photo resistor
Light Dependent Resistor (LDR)
NTC Resistor
PTC Resistor
NPN signal transistor
PNP signal transistor
NPN power transistor
PNP power transistor
Silicon Controlled Resistor (SCR)
TRIAC
Injunction transistor (UJT)

Required but included in other CENCO® kits:

47 Ohm resistor (Cenci Electronics System 2)
100 Ohm resistor (CENCO Electricity System 1)
1 kOhm resistor (CENCO Electricity System 1)
10 kOhm resistor (CENCO Electronics System 2)
1 MOhm resistor (CENCO Electronics System 2)
1 k microF capacitor (CENCO Electricity System 1)
Single pole switch (CENCO Electricity System 1)
Bridging plugs (CENCO Electronics System 2)
Bulb holder (CENCO Electricity System 1)
Bulb (E10, 12 V) (CENCO Electricity System 1)
Battery holder (CENCO Electricity System 1)
1.5 V battery (CENCO Electricity System 1)
100 kOhm potentiometer (variable resistor) (CENCO Electronics System 2)

Required but not included:

DC Power Supply (rated for 12 V)
AC Power Supply (rated for 12 V)
Digital Multimeters
Banana plug cords multiple
Meter stick
Flashlight
Timer
Hot air dryer
Ice pack

The CENCO® Electronics System 2 Kit includes materials for 9 activities on advanced electricity based topics.

Activities are designed to guide students to discover concepts but are styled so the instructor knows what equipment is needed for each activity. Other CENCO kits are required for use with this kit.

Experiment topics include: Step up transformer, step down transformer, DC motor, two motors in series, two motors in parallel, linked motors, SPDT switch, two SPDT switches, relay.

Included in the CENCO® Electronics System 2 Kit:

Iron Core
Transformer Base
600 Turn Coil
1200 Turn Coil
Motor Model
DC Electric Motor
Plastic Propeller
Rubber Tube
Bridging Plug
Piezoelectric Buzzer
Toggle Switch
Push-button Switch
SPDT Switch
Relay, 6-12 V

Required but not included in the CENCO® Electronics System 2 Kit:

AC Power Supply (0-15 V)
DC Power Supply (0-12 V)
Digital multimeter
1.5 V cell battery (AA)