The Direct Connect Temperature has a brass tube with a temperature sensor at the end. The tube is covered with Teflon heat-shrink tubing to make it resistant to chemicals. It plugs directly into ULI, Serial Box, or MPLI interfaces. The temperature range is –15 to 110°C (±0.2°C in normal use).
Range: –15 to 110°C
Linearity: ±0.55 °C
Resolution: 0.07°C (ULI II, Serial Box Interface, or LabPro), 0.284°C (ULI or CBL 2)
Power: 0.15 mA @ 5 VDC
Water (with stirring): 6 to 8 seconds (typical)
Moving Air: 30 seconds