Logic Cart fits under any telescoping base stand. Features three small and one large compartments, one drawer, front panel cut out for dispensing wipers or gloves, and HDPE worksurface. W×D×H: 635×483×686 mm (25×19×27").
Service Fixture Kit includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior. Up to two may be installed per side.
Base Stands — Constructed of durable 45 mm (1¾") tubular, glacier white epoxy-coated steel, these ADA-compliant base stands support up to 453.6 kg (1000 lbs.). Stands have a depth of 737 mm (29"). Stands with telescoping legs are adjustable to seven height positions in 25 mm (1") increments from 699 to 851 mm (27½ to 33½"). Available with fixed leveling feet or 127 mm (5") diameter toe-locking polyurethane casters with bearings for quiet operation. Hydraulic lift base stands are adjustable to any height from 648 to 851 mm (25½ to 33½") and include four powder-coated, die-cast feet with levelers. Feet can be replaced with casters for mobility. Manual hydraulic lift models include front-accessible hand crank. Electric hydraulic lift models include a front-accessible up/down switch and a 3.7 m (12') three-wire cord and plug. Electrical components of electric hydraulic lift stands are UL listed.
They support a maximum of 589.7 kg (1300 lbs.). Stands have a depth of 870 mm (34⅟₄"). Built-in hydraulic lift is operated by remote control with buttons for upward and downward adjustability, providing work surface heights from 43.8 to 93.3 cm (17¼ to 36¾") and overall enclosure height as low as 1935 mm (76.2"). The supported enclosure can be positioned for persons of different statures, wheelchair-bound users, transport through doorways, and easier access to upper components. Stands include 127 mm (5") diameter toe-locking polyurethane casters with bearings for quiet operation. Handle bars on both sides facilitate transport. When placed on stands that can be easily raised and lowered, enclosures that are ducted outside will require special modifications to incorporate flexible ducting, wiring, and plumbing. Placing outside ducted enclosures on mobile stands is not recommended.
Caster Kit contains four 127 mm (5") diameter casters. For use with hydraulic lift base stands, except for the SoLo base stands, which come with casters. Shelves are epoxy-coated 25 cm (9²⁹/₃₂") deep steel shelves for use with telescoping base stands.
Certifications: SoLo™ Base Stands with Remote Control are ADA- and NSF-compliant.
Ordering information: All base stands for 1.2 m (4') and 1.8 m (6') models can also be used with PuriCare® Procedure Stations.
Delivery information: Items designated below as REDISHIP can be shipped within 48 hours of receiving your order.