Copper(II) Sulfate Pentahydrate

Ratings:
Avg. Ratings: 5.0 (1 Review)

Total Ratings: 1
Avg. Ratings: 5.0 out of 5

Was this review helpful? Yes No
Yes: 1 No: 0 
Alberta
Yes, I recommend
Excellent! - Accurately and appropriately labeled product. The large variety of sizes you can get of this product are very useful. We use a lot of this at our high school for labs and being able to buy 2.5kg is much more cost effective.
CC0550-2.5KG CC0535-500G CC0535-500GR CC0535-100GRF CC0535-2.5KG CC0535-500GRF CC0545-2.5KG CC0551-50ML CC0535-2.5KGRF CC0535-CAP CC0535-CAP CC0550-500G CC0552-500ML CC0430-CONC CC0545-2.5KGR CC0550-100G CC0535-100GR CC0430-500ML CC0545-500G CC0545-100G CC0545-500GR CC0535-2.5KGR CC0551-500ML
470300-848EA 11.55 USD
470300-848 470300-858 470300-868 470300-856 470300-878 470300-888 470300-866 470300-854 470300-876 470108-112 470300-864 470300-886 470300-874 470300-896 470300-852 470300-884 470300-862 470300-850 470300-872 470300-894 470300-860 470300-870 470300-892
Copper(II) Sulfate Pentahydrate
Chemicals for Science Education
CAS Number: 7758-99-8
Formula: CuSO4 5H2O
Density: 2.284 g/mL
Freezing Point: 150°C
Solubility: Water and Methanol
Synonyms: Copper II Sulfate 5-Hydrate, Cupric Sulfate 5-Hydrate
Shelf Life: 36 Months

Note: The chemical specifications for some items on this product page may differ from the specifications listed above. For more information, consult the Safety Data Sheet or contact your Ward's representative.

Delivery information: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.

Caution: This product is a toxic irritant.



   
 

ORDER

Disposal

This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.

The disposal of this chemical does not need pretreatment and it is not necessary for any chemical reaction to be conducted before it is disposed into a landfill or down the school drain. HOWEVER, there are numerous conditions that should be met which are outlined below before this can be discharged.

If the material is in the solid form, it can be buried in a landfill if:
 a. Local regulations have been confirmed that this material can be disposed of in a landfill.
 b. Chemical is packed into a cardboard box with an appropriate amount of packing material.
 c. Cardboard box is sealed with durable tape.

If the material is in an aqueous form, it can be poured down the drain with excess water if:
 a. Local and State regulations have been checked and you have verified that this material is suitable for this type of disposal
 b. The school drain is connected to the sanitary sewer system.
 c. The quantity that you are disposing of is minimal. A good rule of thumb is less than 250 mL.
 d. Combinations of chemicals are not going down the drain at the same time.
 e. A twenty-fold excess of water is used when washing the chemical down the drain.

A good resource to contact is the local wastewater treatment facility as they can give you guidance and be a resource on drain disposal.

Solution Prep

To prepare a solution, determine the formula weight of the material, the concentration (Molarity) of the solution, and the amount of solution desired in Liters. Once this information has been obtained, use the following formula:
(Formula Weight) x (Concentration) x (Desired Volume) = Number of grams in desired volume of liquid

For a 1 M, 1 L solution:
(Formula Weight) x (1 mol/L) x (1 L) = x g added to 1-L volumetric flask. Dilute to a final volume of 1 L with DI Water.

PRODUCT RESOURCES

WRITE A REVIEW

REVIEWS (1)