Iodine, Solution

Ratings: (No Reviews)

Total Ratings: 0
Avg. Ratings: 0.0 out of 5

IX0190-500ML IX0160-500ML IX0160-100ML IX0160-2L IX0190-100ML IX0150-500ML IX0150-2L IX0150-100ML IX0160-500MLR IX0139-500ML IX0150-1L IX0138-500ML IX0138-1L IX0160-100MLR IX0150-50ML
470301-336EA 24.99 USD InStock
470301-336 470301-332 470301-314 470301-316 470301-334 470301-330 470301-326 470301-324 470301-320 470301-312 470301-322 470301-310 470301-308 470301-318 470301-328
Iodine, Solution
Chemicals for Science Education
CAS Number: Mixture
Density: 0.7919—0.7955 g/mL Tincture
Boiling Point: 74 to 80°C Tincture
Freezing Point: -114°C Tincture
Shelf Life: 12 Months

Note: The chemical specifications for some items on this product page may differ from the specifications listed above. For more information, consult the Safety Data Sheet or contact your Ward's representative.

Delivery information: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.

Caution: This product is a corrosive and toxic irritant.



   
 

ORDER

Disposal

This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.Use a lab apron, chemical resistant gloves and goggles before following the below method to dispose of hazardous waste.1. Add the substance to a twofold excess of 4% sodium thiosulfate (Na2S2O3) solution. Stir. Place the solution in a fume hood.2. Let the reaction come to completion over the course of an hour. 3. Neutralize the solution with either dilute sodium hydroxide or dilute sulfuric acid to about a pH of 7 if necessary.4. Pour the final solution down the drain with at least a 20-fold excess of water.

Solution Prep

To prepare a Lugol's iodine solution, add 20 g of potsasium iodide to 100 ml of DI water. Next, add 10 g of iodine. Dilute to a final volume of 1 L with DI water.To prepare Iodine Tincture, add 50 g of potassium iodide to 500 ml of DI water. Next, add 70 g of iodine and dilute to a final volume of 1 L with 95% ethyl alcohol.To prepare a potassium iodide-iodine solution, add 15 g of potsasium iodide to 100 ml of DI water. Next, add 3 g of iodine. Dilute to a final volume of 1 L with DI water.

PRODUCT RESOURCES

WRITE A REVIEW

REVIEWS (0)