Formula Weight: Mixture Formula: Mixture Density (g/mL): Approximately 1 Shelf Life (months): 12 Storage: Green
Caution: Please Note: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.
We are currently unable to calculate your contract price for this item. List price is being displayed temporarily. When your order is processed, you will be invoiced at your contract price even though list price is displayed now
This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.
The disposal of this chemical does not need pretreatment and it is not necessary for any chemical reaction to be conducted before it is disposed into a landfill or down the school drain. HOWEVER, there are numerous conditions that should be met which are outlined below before this can be discharged.
If the material is in the solid form, it can be buried in a landfill if: a. Local regulations have been confirmed that this material can be disposed of in a landfill. b. Chemical is packed into a cardboard box with an appropriate amount of packing material. c. Cardboard box is sealed with durable tape.
If the material is in an aqueous form, it can be poured down the drain with excess water if: a. Local and State regulations have been checked and you have verified that this material is suitable for this type of disposal b. The school drain is connected to the sanitary sewer system. c. The quantity that you are disposing of is minimal. A good rule of thumb is less than 250 mL. d. Combinations of chemicals are not going down the drain at the same time. e. A twenty-fold excess of water is used when washing the chemical down the drain.
A good resource to contact is the local wastewater treatment facility as they can give you guidance and be a resource on drain disposal.
To prepare a phosphate buffer solution, add 2.76 g of sodium phosphate monobasic to 100 ml of DI water. Next, in a separate container, add 5.36 g of sodium phosphate dibasic. Mix 68 ml of the sodium phosphate monobasic solution with 32 ml of the sodium phoshpate dibasic solution to prepare the buffer.
WRITE A REVIEW
How is savings calculated? We
multiply the savings per unit (in parenthesis) times the
total units of the original product.