KidWind Blade Pitch Protractor, incredibly helpful for measuring the blade pitch angle on your KidWind turbine, Recommended for College, High School, and Middle School Science
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D25
KidWind Wind Turbine Generator with Wires, Recommended for College, High School, and Middle School Science, Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, wire length: 4 ft, Shaft diameter: 2 mm
KidWind Motor Mount Pack, secures a motor to the nacelle, Includes: Two blue plastic motor mounts, Mounting screws and nuts, Recommended for College and High School
KidWind Sound and Light Board, simple power output board that comes standard with the MINI Wind Turbine, great way to demonstrate power output from small electrical devices, needs at least 2 V to start working
KidWind Red Blade Set, 8-inch diameter wind turbine blades are optimized to spin at very high RPMs, fit on any DC generator or motor with a 2 mm driveshaft, Recommended for College, High School, and Middle School Science
KidWind Small Water Pump with Tubing, Recommended for College and High School, to demonstrate power output from the wind and solar kit, makes comparing different turbine designs easy; simply measure how high different turbines can pump water using this mini pump
KidWind Balsa Blade Sheets, very lightweight and stiff, and it is perfect for making experimental wind turbine blades, for College, High School, and Middle School Science, Pk10
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D100
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School
Cloud Formation Apparatus, fun and interesting way to demonstrate the principles behind the formation of clouds without ever leaving the classroom, Components: Side arm with Pinch Clamp and Rubber Hose, Flask, Rubber Bulb, use only in a laboratory
KidWind Wind Turbine Hub, three-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius
Botley* Coding Robot Action Challenge Accessory Set, Engage and inspire young learners in STEM with our next generation of coding robot, 100% screen-free, Engages children as young as 5 years in a basic form of coding utilising step coding and logic
light leaper accessory, insulating printed circuit board carries a metallic conduction path with six breaks and a binding post at each end, When connected to an operating electrostatic generator, simultaneous sparks occur in each of the breaks as charge flows
Collision In Two Dimensions, Consists Of A Curved Track With A Base At One End. On The Base Is A Support To Hold A Ball At The Proper Height For A Center To Center Collision, Consists Of 25Cm One Piece Track, 3 Balls 12mm Diameter, 2 Steel, 1 Glass And 1 Plumb Bob.
Junior Magnet Kit, A Kit Of Magnets And Accessories For Science Experiments, Each Of Square Iron, Aluminium, Zinc And Copper Metal, 1 Horseshoe Magnet With Keeper, 100mm 2 Ceramic Bar Magnets 75 mm Long. 3 Ceramic Ring Magnets, 38 mm Dia, Face Polarised.2 Plotting Compasses
KidWind Power Output Board, includes a visual voltmeter, LEDs, resistors, a capacitor, and a sound generator, This device makes it very easy to demonstrate and measure the power output of your small wind turbines or solar panels.
KidWind Wind Turbine Generator with Wire,Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, Wire length: 4 ft, Shaft diameter: 2 mm, Recommended for College, High School, and Middle School Science
List View
Easy View (new)
