KidWind Blade Pitch Protractor, incredibly helpful for measuring the blade pitch angle on your KidWind turbine, Recommended for College, High School, and Middle School Science
KidWind Motor Mount Pack, secures a motor to the nacelle, Includes: Two blue plastic motor mounts, Mounting screws and nuts, Recommended for College and High School
KidWind High Torque Generator with Wires, High Torque Generator produces lower voltage but higher current for a given rotor speed, Recommended for College and High School
Noseclip, plastic, foam-padded noseclips help increase the accuracy of spirometry results by eliminating the escape of air through the nostrils during testing
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D100
Analog Breadboard Cable, provides an easy way for students to build their own sensor circuitry and input signal into a interface for data acquisition, six pins available: SIG1, 5V, ID, VRES, GND, and SIG2, with standard British Telecom Analog (BTA) connector
Mouthpiece, Disposable, For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School
KidWind Chipboard Sheet, stiff, easy to cut, lightweight, low cost, and recyclable material used to make simple wind turbine blades, Length: 12 in, Width: 3 in, Thickness: 1.5 mm
KidWind 2V/400mA Solar Panel, C0034, for demonstrations and experiments. External screw terminals and attached clip cords make the panels easy to use, Dimensions: 62 mm x120 mm
KidWind Wind Turbine Hub, three-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius
Lets Go Investigating Temperature, Lab book, Aimed especially for elementary teachers, this lab book contains ten engaging temperature experiments, Activities for grade 2 through 5, Lots of teacher tips, Clear illustrations to facilitate underst
Interface Shield provides a convenient way to make connections from microcontrollers to sensors. Shield plugs directly on top of and adds two BTA (analog) and two BTD (digital) sockets, be used with SparkFun RedBoard, also works with Intel Galileo
KidWind Wind Turbine Generator with Wire,Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, Wire length: 4 ft, Shaft diameter: 2 mm, Recommended for College, High School, and Middle School Science
Disposable Bacterial Filter, disposable microbacterial filter significantly reduces need to sterilize your spirometers flow head, 30 mm ID opening allows for an easy, air-tight fit to the flow head
Chemistry Investigation, Book, provides AP Chemistry students with 16 inquiry-based laboratory experiments aligned with the inquiry investigations, provides a comprehensive set of resources for the AP Chemistry teacher, including sample data, sample analysis and calculations
Book, Renewable Energy with Vernier, Recommended for High School, features 26 experiments in wind and solar energy, contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects
Independence of Motion, enables the Projectile Launcher to perform the classic experiment where one ball is dropped as another is projected horizontally. The balls strike the floor simultaneously. A built-in level makes leveling th
Spirometer, designed to make human respiratory measurements at rest and during moderate activity. Used to perform a variety of experiments related to air flow and lung volume. Removable flow head (22 mm ID/30 mm OD) makes it easy to clean and sterilize
KidWind Solar Thermal Exploration Kit, modeled after a domestic solar water-heating system. Explore variables such as box color, light intensity, tube design, rate of water pumping, and amount of time it takes to heat the water
KidWind Wind Turbine Hub, ten-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
List View
Easy View (new)
