KidWind Motor Mount Pack, secures a motor to the nacelle, Includes: Two blue plastic motor mounts, Mounting screws and nuts, Recommended for College and High School
Analog Breadboard Cable, provides an easy way for students to build their own sensor circuitry and input signal into a interface for data acquisition, six pins available: SIG1, 5V, ID, VRES, GND, and SIG2, with standard British Telecom Analog (BTA) connector
KidWind Solar Thermal Exploration Kit, modeled after a domestic solar water-heating system. Explore variables such as box color, light intensity, tube design, rate of water pumping, and amount of time it takes to heat the water
Book, Renewable Energy with Vernier, Recommended for High School, features 26 experiments in wind and solar energy, contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects
Independence of Motion, enables the Projectile Launcher to perform the classic experiment where one ball is dropped as another is projected horizontally. The balls strike the floor simultaneously. A built-in level makes leveling th
Circuit Board 2, Mass: 0.44 kg, Optional power sources: up to 4 AA batteries, not included, DC power supply such as Extech Digital DC power supply, Power Amplifier, Maximum voltage: 10 V, Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended
Fan Cart large fan on a light-weight cart, offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle
KidWind Basic Turbine Building Parts, kit includes the KidWind Hub, a wind turbine generator, and 25 dowels, Recommended for College and High School, Pk10
KidWind simpleGEN, easy-to-build AC generator that allows students to explore the basics of electrical generator design, Recommended for College, High School, and Middle School Science, classroom pack
Melt Station, sensor, makes it possible to accurately determine the melting temperature of solid substances, Innovative, adjustable tilt allows for optimal viewing angle, Cooling fan reduces time between tests
Diffraction Apparatus, Used to map light intensity versus position for many-slit geometries, Slits are made by depositing metal film on glass, creating extraordinarily clean slits with fully opaque blocking areas.
Mouthpiece, Disposable, For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students
Interface Shield provides a convenient way to make connections from microcontrollers to sensors. Shield plugs directly on top of and adds two BTA (analog) and two BTD (digital) sockets, be used with SparkFun RedBoard, also works with Intel Galileo
Encoder Fan Cart, large fan on a light-weight cart, For use with Vernier Motion Encoder System, offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle
Spirometer, designed to make human respiratory measurements at rest and during moderate activity. Used to perform a variety of experiments related to air flow and lung volume. Removable flow head (22 mm ID/30 mm OD) makes it easy to clean and sterilize
KidWind Blade Pitch Protractor, incredibly helpful for measuring the blade pitch angle on your KidWind turbine, Recommended for College, High School, and Middle School Science
Variable Load, used in conjunction with the Energy Sensor to provide a range of resistive loads for projects such as wind turbines or solar panels, Students can adjust the potentiometer to provide resistances between 6 and 255 ohm
Disposable Bacterial Filter, disposable microbacterial filter significantly reduces need to sterilize your spirometers flow head, 30 mm ID opening allows for an easy, air-tight fit to the flow head
KidWind Advanced Wind Experiment Kit, wind turbine technology, Test different blade designs, gear ratios, generators, and devices to measure electrical and weightlifting power, for College, High School, and Middle School
KidWind Wind Turbine Hub, three-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
KidWind GENPack, allows students to construct their own electrical generator and perform experiments with electricity and magnetism, for physics and electrical students exploring Faraday s law, induction, AC/DC electricity production, and energy transformations
Lets Go Investigating Temperature, Lab book, Aimed especially for elementary teachers, this lab book contains ten engaging temperature experiments, Activities for grade 2 through 5, Lots of teacher tips, Clear illustrations to facilitate underst
KidWind Chipboard Sheet, stiff, easy to cut, lightweight, low cost, and recyclable material used to make simple wind turbine blades, Length: 12 in, Width: 3 in, Thickness: 1.5 mm
Time of Flight Pad sensor to precisely measure how long a projectile has been in motion, determine the launch speed of a projectile, along with the time the projectile is in flight, allow students to see just how kinematic calculations work in rea
KidWind 2V/400mA Solar Panel, C0034, for demonstrations and experiments. External screw terminals and attached clip cords make the panels easy to use, Dimensions: 62 mm x120 mm
Noseclip, plastic, foam-padded noseclips help increase the accuracy of spirometry results by eliminating the escape of air through the nostrils during testing
KidWind High Torque Generator with Wires, High Torque Generator produces lower voltage but higher current for a given rotor speed, Recommended for College and High School
KidWind Balsa Blade Sheets, very lightweight and stiff, and it is perfect for making experimental wind turbine blades, for College, High School, and Middle School Science, Pk100
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School
Chemistry Investigation, Book, provides AP Chemistry students with 16 inquiry-based laboratory experiments aligned with the inquiry investigations, provides a comprehensive set of resources for the AP Chemistry teacher, including sample data, sample analysis and calculations
Adapter, myDAQ, allows to connect sensors to National Instruments interface, Includes: two connectors for analog sensors and one connector for digital sensors, screw terminal and header pins provide access to myDAQ lines not used by connectors
Combination 2. 2 m Track and Optics Bench, black anodized aluminum and includes a metric scale. Extremely rigid, this 2. 2 meter track will not sag under use, The track includes 2 Adjustable Two Foot Levelers.
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D100
KidWind Wind Turbine Generator with Wire,Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, Wire length: 4 ft, Shaft diameter: 2 mm, Recommended for College, High School, and Middle School Science
KidWind simpleGEN, easy-to-build AC generator that allows students to explore the basics of electrical generator design, Recommended for College, High School, and Middle School Science
Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius
KidWind Wind Turbine Hub, ten-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
List View
Easy View (new)
