Ethanol sensor, used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample
Goniometer measures the angle of a joint, such as the knee or elbow. Use it to analyze the range of motion of a limb during different types of physical activity, A set of elastic straps are used to secure the sensor to the subject.
Go Direct* Gas Pressure Sensor, measures the absolute pressure of a gas, Specifications: Range: 0 to 400 kPa, Resolution: 0.03 kPa, Maximum pressure that the sensor can tolerate without permanent damage: 450 kPa, Connections: Wireless Bluetooth, Wired USB
Go Direct* Conductivity Probe, determines the ionic content of an aqueous solution by measuring its electrical conductivity, Range: 0 to 20,000 uS/cm, Temperature compensation: Automatic from 5 to 35 deg C, can be turned off, Temperature range: 0 to 80 deg C
Go Direct* Radiation Monitor, detects alpha, beta, gamma, and X-ray radiation, Sensor: LND 712 (or equivalent) halogen-quenched GM tube with a mica end window, 1.5 to 2.0 mg/cm2 thick, Red LED blinks on radiation detection, Optional audio signal on radiation detection
Go Direct* pH Sensor, is a general-purpose pH sensor used to monitor pH of aqueous solutions, pH range: 0-14, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Shaft diameter: 12 mm OD, Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution)
Go Direct* 3-Axis Magnetic Field Sensor, allows you to determine the magnitude and direction of the magnetic field at any point in space, Measurement range: +/-5 Mt, Operating temperature: -40 deg C to 85 deg C, Dimensions: 19x12.2x0.7 cm, Factory-calibrated
Go Direct* Force and Acceleration Sensor, couples a 3-axis accelerometer with a stable and accurate force sensor that measures forces as small as +/- 0.1 N and up to +/- 50 N, Acceleration: 3 axis, +/- 16 g, Gyroscope: 3 axis, 2000 deg /s
Noseclip, plastic, foam-padded noseclips help increase the accuracy of spirometry results by eliminating the escape of air through the nostrils during testing
Voltage Probe, This sensor is used to measure voltages in the range of -30 to +30 voltsUse this sensor in experiments that involve voltages larger than 10 volts, such as when working with large solar panels. Since this voltage probe covers